Cannon Display Stands, Carriages and Plans!

We have available various types of cannon carriages and display stands that we purchase or custom manufacture ourselves.  Occasionally we have original carriages and cannon mounting stands available.  Please see our current inventory below or contact us for a quote on a custom made carriage.  If you have any  original cannon carriages or accessories for sale -  please contact us!

   

     Some sample carriages we have built above!

We can build ANY size or type of custom Naval or Mortar/Howitzer carriage.

Custom Made to Order United States Civil War Field Carriages and Limbers

 for ANY medium or large size/type cannon!

   

     

    

Made from Black Walnut (shown & recommended) or Oak.

Contact us for pricing for your cannon!

Reenactors Civil War Cannon "Project" Carriage

This is a brand new Civil War Reenactors carriage that was never completed and part of an estate sale. It is 95 to 100% complete!

It is 62 inches long from end to end, 48 inches wide from tip to tip on the axle, and the wheels are 31 inches in diameter.

 

Sale pending 5/17/2012

Price Only:$1,500 US$

Located in Exeter, Pa. for free pick up or we can arrange delivery

  Museum Quality Teak Field Cannon Carriages in Stock!

Full 36 inch diameter wheels!

 

We are currently able to offer these very fine solid teak wood field cannon carriages for a very limited time while the supply lasts.  Only fifteen available - all located in Kentucky for immediate delivery or FREE pick-up.  We can arrange reasonable delivery in the USA or can also arrange shipping overseas for multiple purchases.

These are suitable for cannons from 36 to 52 inches in length and possibly longer.  They are NOT for live fire, but for display purposes only!

Priced at only $1,950 US$ each!

Custom made to order Naval Carriages

   

Just completed for a Portuguese 6' 7" bronze cannon!

Made to order in Texas for ANY size cannon!

Now available again for custom orders!

 

 

      

   

  These can be custom made for your cannon it three ways.  The modern on extreme left,  the "Antiqued" version in the middle is all new wood and hardware that has been treated to look like an original antique.  The "Antique" type on the right uses "old" hardware and fitting as well as "old" wood where ever possible.  Contact us for a quote on your cannon or for one of these carriages for a cannon you are purchasing from us. We can build any size naval carriage for you!

    

We can also build them for both firing and for display cannons only at a reduced cost.  The carriages shown below are for display only.

   

The following measurements are needed for custom carriages!

    

Bronze & Iron Naval Cannon Carriage Plans/Blueprints!
Build your own full size - half scale or any size cannon carriage with these!

After MANY MANY requests we have acquired full building blueprints for both 24 and 32 pounder Naval Cannon Carriages. These are done in the 1" to 1 ft. scale with all measurements and can easily be adapted for other size cannons. Measurements on the plans are for both full and half size cannon carriages! They can, of course, be scaled down for models or any other size.

This sale is for one complete of plans for both the 24 pounder and the 32 pounder. They are mailed folded by International Air Mail.

Additional Information:

The full size 32 pounder cannon weighs 3.5 tones - 2.75 tones for the gun barrel and 0.75 tones for the wooden gun carriage. It fired a 32 pound (14.7Kg) ball, usually propelled by an 11 pound (5Kg) gunpowder charge giving a muzzle velocity of 1600 feet per second (487 meters per second). Fired from the lower gun deck, with the muzzles some 2m above the waterline, this gave a point blank (fired flat) range of approximately 1000 feet (300m).

Priced at only $20 US$ each set - Delivered anywhere in the world by Registered International Airmail!

Bronze & Iron Civil War Field Cannon Carriage Plans!
Build your own full size field cannon carriage with these!
   

After MANY requests we have acquired the full building blueprints for the Civil War 6 Pounder Field Carriage and had them redrawn for our customers. These are exact copies of the actual drawings showing exact dimensions and sizes of the Federal 6 pounder cannon carriage. The second sheet gives all the dimensions and sizes of the metal fittings and the wheels.  Measurements on the plans are for full size cannon carriages! They can, of course, be scaled down for models or any other size scale cannon.  They do not include the building plans for the wheels, but they are shown.

  

Sheet size: 32 X 23.5 inches

This sale is for one set (2 sheets) of plans for the six pounder. They are mailed folded by International Air Mail to anywhere in the world. The photos are similar carriages made from these plans.

Price is only $20 US$ including shipping anywhere in the world!
 The cannon in some of the photos is not included !

 

We want to buy for cash and or sell on consignment - ALL types of original carriages, carriage hardware, and all other original and reproduction accessories for cannons. 

   

Your Name:
Your E-Mail:
Your Comments:
This test prevents automated submissions Enter the text that appears in above image:

   

Note: For the FASTEST response to orders and inquires - always use email or the reply form above!

Last up-dated on 05/18/2012